An article to teach you the cleaning and maintenance skills of the heat station supporting plate heat exchanger
Before heating after the shutdown, the overhaul and maintenance of the heat station supporting plate heat exchanger is a key task. During maintenance, removable ones need to be removed from the plates and descaled for cleaning. There are some cleaning and maintenance methods that can share the experience with you.
Generally speaking, the heat station supporting plate heat exchanger heat supply operation for five to six months. The working medium is softened water, with a maximum temperature of 140. although softened water, but can not avoid the scale attached to the plate. If the scale is high, it will not only affect the heat transfer effect, but also cause damage to the plate. Therefore, during maintenance, the plates must be disassembled and descaled.
Check the scale condition of the plate sheet. If the scale is golden yellow and the scale is serious, it is not easy to clean just with physical cleaning and must be cleaned with chemical cleaning; if the scale is uneven and yellow, physical cleaning can be considered. The method is as follows: chemical cleaning steps: soak with 5% safe descaling cleaning solution for 15 hours to ensure soaking time. If it is too short, the scale removal is not complete, if it is too long, it affects the service life of the plate. Then take out the soaked plate and clean it with a soft brush, while rinsing with water. Physical cleaning steps: Firstly, according to the degree of scale, choose a high-pressure water gun with suitable pressure, and rinse with the water gun along the grain of the plate repeatedly to ensure that the stubborn scale is washed away. When using the high-pressure water gun, strictly observe the safety operation specification of the high-pressure water gun. Then lift the high-pressure water gun washed plate to two high and low chairs, one with water and one with a soft brush to scrub the remaining scale.
Qingdao Reapter professional production of heat station supporting plate heat exchanger, with experienced technical team and staff, if you want to know Qingdao Ripert, please click below for details immediately. We can provide you with customized solutions and free selection quotes!
Related information
- After consulting the master for ten years, only to know that the plate and shell heat exchanger applications are so many!
- Introduction to the cleaning method of Ruipute plate heat exchanger
- Coal chemical plate heat exchanger, blast furnace flushing slag water waste heat recovery preferred wide flow channel
- Snow is coming, cool down, pay attention to whether these parameters of the plate heat exchanger are normal
- Corrugation, strength and stiffness of plate heat exchanger plates
- Development and application of plate and shell heat exchangers in China
Relevant article
- The original lubricant in the chemical plate heat exchanger plays so many roles!
- Heat exchanger station supporting plate heat exchanger or have to pay attention to these points, or easily go wrong
- Heat station supporting plate heat exchanger installation is a technical work, these points should be noted
- Improve the efficiency of industrial boilers with plate heat exchanger, these maintenance points to keep in mind
- The Integrated Heat Exchanger Unit: An Efficient Integration and Intelligent Control Solution for Thermal Energy Conversion
- Sulfuric acid and other corrosive media for industrial plate heat exchanger requirements are what
- Simple and effective chemical cleaning method of coal chemical plate heat exchanger, can effectively improve efficiency
- A high-quality petrochemical plate heat exchanger in the production of what to consider
- These causes of chemical plate heat exchanger gasket aging you may not know
- Chemical plant plate heat exchanger, sulfuric acid cooling needs attention
Latest information
- The original lubricant in the chemical plate heat exchanger plays so many roles!
- Heat exchanger station supporting plate heat exchanger or have to pay attention to these points, or easily go wrong
- Heat station supporting plate heat exchanger installation is a technical work, these points should be noted
- Improve the efficiency of industrial boilers with plate heat exchanger, these maintenance points to keep in mind
- The Integrated Heat Exchanger Unit: An Efficient Integration and Intelligent Control Solution for Thermal Energy Conversion
- Sulfuric acid and other corrosive media for industrial plate heat exchanger requirements are what
- Simple and effective chemical cleaning method of coal chemical plate heat exchanger, can effectively improve efficiency
- A high-quality petrochemical plate heat exchanger in the production of what to consider
- These causes of chemical plate heat exchanger gasket aging you may not know
- Chemical plant plate heat exchanger, sulfuric acid cooling needs attention







