Search - fouling

Location: Home -> Search: fouling

: Semi welded plate condenser

The plate condenser consists of plates that are welded together in pairs to form a so-called plate set. The concept of a plate set leads to two different types of channels: a weld channel for condensing steam and a gasket seal channel for cooling water. This type of plate is specially designed for optimum condensation. It has an asymmetrical arrangement with a large gap on the steam side and a small gap on the cooling water side. This makes it possible to maintain a very low pressure drop at the steam end while maintaining a certain speed and turbulence on the cooling water side. This maximizes heat transfer efficiency and minimizes fouling.
More +

[Q & A]Plate Heat Exchanger Troubleshooting: Reading the Symptoms Before Opening the Pack2026.10.27 14:30: Three symptoms, three closed sets of causes. Diagnose temperature shortfall, rising pressure drop and leakage in the right order, cheapest check first.; read（3） label：troubleshooting|diagnosis|fouling

[Q & A]Plate Heat Exchanger Sizing: A Worked Calculation from Duty to Plate Count2026.10.27 14:30: A six-step sizing sequence worked on a 500 kW water-to-water duty: heat load, flow arrangement, U-value, LMTD, correction factor, fouling margin and plate count.; read（3） label：sizing|calculation|LMTD

[Q & A]Waste Heat Recovery with Plate Heat Exchangers: Sizing and Fouling2026.10.26 21:48: Where a heat source sits on the temperature scale decides everything: bands, pinch economics, fouling and the acid dew point floor.; read（2） label：waste heat recovery|fouling|energy efficiency

[Q & A]Variable Flow and Part-Load Operation of Plate Heat Exchangers2026.10.25 09:15: Part-load behaviour of a plate heat exchanger: falling pressure drop, distribution and fouling limits, minimum-flow bypass and on-site verification.; read（4） label：variable flow|part-load|minimum flow

[Q & A]Fouling Allowance in Plate Heat Exchanger Design: Sizing the Margin2026.10.19 14:57: How to set the fouling allowance in plate heat exchanger design: typical resistances by fluid, why plate units are sensitive, and when more plates backfire.; read（5） label：fouling allowance|fouling factor|heat exchanger fouling

[Latest news]How to avoid fouling and blockage of plate heat exchanger2020.07.28 03:48: There are many reasons for the fouling and clogging of plate heat exchangers. If clogging or fouling occurs, it will not only reduce the heat transfer; read（54） label：

[Latest news]Principle of cleaning to prevent fouling of plate heat exchanger2020.07.21 09:22: Heat exchanger smooth fluent area is small, the internal structure is complex, if the cleaning fluid produces precipitation is not easy to discharge.; read（418） label：

[Latest news]Introduction to the cleaning method of Ruipute plate heat exchanger2020.07.13 06:05: Friends who have used Ruipute plate heat exchanger should understand that plate heat exchanger in use will be more prone to the phenomenon of fouling; read（26） label：

Hot spot focusing