- [Q & A]Parallel Plate Heat Exchanger Banks: N+1 Redundancy and Flow Balancing2026.10.29 09:16
- Why plants pipe plate heat exchangers in parallel banks: N+1 standby philosophy, header and valve arrangement, and per-unit flow at part load.
- read(10)
- [Q & A]Data Centre Waste Heat to District Heating: Matching Low-Grade Heat to a Network2026.10.27 14:31
- Data centre heat reuse lives or dies on network return temperature, distance and absorption hours. Temperature matching and the isolation PHE station.
- read(22)
- [Q & A]Plate Heat Exchanger Sizing: A Worked Calculation from Duty to Plate Count2026.10.27 14:30
- A six-step sizing sequence worked on a 500 kW water-to-water duty: heat load, flow arrangement, U-value, LMTD, correction factor, fouling margin and plate count.
- read(19)
- [Q & A]Variable Flow and Part-Load Operation of Plate Heat Exchangers2026.10.25 09:15
- Part-load behaviour of a plate heat exchanger: falling pressure drop, distribution and fouling limits, minimum-flow bypass and on-site verification.
- read(10)
- [Q & A]Plate Heat Exchanger Flow Arrangement | Reapter2026.10.19 14:58
- Series, parallel and multi-pass arrangements change the temperature difference, pressure drop and flow distribution of a plate heat exchanger. How to choose.
- read(28)
- [Q & A]Fouling Allowance in Plate Heat Exchanger Design | Reapter2026.10.19 14:57
- How to set the fouling allowance in plate heat exchanger design: typical resistances by fluid, why plate units are sensitive, and when more plates backfire.
- read(15)
- [Q & A]Close Temperature Approach in Plate Heat Exchangers: How Close Is Practical?2026.10.19 14:56
- The approach temperature decides the size, cost and behaviour of a plate heat exchanger. What it is, how close you can practically go, and what breaks below 2 C.
- read(29)
- [Q & A]Plate Heat Exchanger for Concentrated Juice Processing2026.09.14 10:34
- Plate heat exchangers provide efficient heating and cooling for concentrated juice, with wide flow channels, strong turbulence
- read(14)
- [Latest news]Coal chemical plate heat exchanger, blast furnace flushing slag water waste heat recovery preferred wide flow channel2021.11.25 03:53
- Coal chemical plate heat exchanger, the development and utilization of waste heat, especially the blast furnace slag water waste heat resources
- read(43)
- [Latest news]Pharmaceutical PHE: Heat Transfer Efficiency2021.11.10 01:08
- Heat transfer efficiency in pharmaceutical plate heat exchangers: temperature program design, flow arrangement and clean-in-place considerations.
- read(48)
- [Latest news]Plate Heat Exchangers: Selection Guide2021.11.08 01:00
- A practical selection guide for plate heat exchangers: thermal load, flow rate, pressure drop and gasket material matched to the application.
- read(55)
- [Latest news]HVAC Plate Heat Exchangers: Low LMTD Design2021.10.21 03:12
- With the increasing number of high-rise buildings, central air conditioning systems have become a necessary system for most buildings.
- read(35)
- [Latest news]PHE Pump Head Selection: Sizing Basics2021.10.18 04:28
- How to determine pump head for a plate heat exchanger system: pressure drop, flow demand and piping losses explained for correct pump sizing.
- read(29)
- [Latest news]Look here to teach you the process of plate heat exchanger2021.10.13 04:16
- In many cases the plate heat exchanger process distribution can be a single process or multi-flow, so how should it be distinguished
- read(48)
- [Latest news]Plate Heat Exchangers: Heat Transfer Efficiency2021.10.13 04:12
- The low heat transfer efficiency of plate heat exchanger is a lot of factors, because the plate type has high heat transfer efficiency
- read(53)
- [Latest news]Plate Heat Exchangers: Design Considerations2021.09.28 03:03
- Key design considerations for plate heat exchangers: thermal approach, pressure drop, flow distribution and maintenance access.
- read(52)
- [Latest news]NT50X Compatible PHE Plates & Gaskets in Stock2021.09.27 03:15
- NT50X-compatible plates and gaskets in stock. Material SS304/SS316, thickness 0.5/0.6 mm, high-theta and low-theta patterns, 4645 pcs available.
- read(35)
- [Latest news]NT50M Compatible PHE Plates & Gaskets in Stock2021.09.27 03:13
- NT50M-compatible plates and gaskets in stock. Material SS304/SS316, thickness 0.5/0.6 mm, high-theta and low-theta patterns, 8282 pcs available.
- read(20)
- [Latest news]NT50T Compatible PHE Plates & Gaskets in Stock2021.09.25 09:41
- NT50T-compatible plates and gaskets in stock. Material SS304/SS316, thickness 0.5/0.6 mm, high-theta and low-theta patterns, 4645 pcs available.
- read(18)
- [Latest news]Free-Flow PHE in Glucose Processing2021.04.07 00:50
- Glucose is a commonly used medical agent, and it is also an industrial raw material for fine chemicals, food industry, fermentation industry, etc.
- read(57)
Related search
Hot spot focusing
- 1Shandong Hengbang uses Ripute semi-welded evaporator and condenser case
- 2Plate Heat Exchanger Material Selection
- 3PHE Plate and Gasket Production: Process Overview
- 4Plate Heat Exchanger Design and Frame Construction
- 5Chuanqing Drilling Engineering Company uses Repute plate and shell heat exchanger case
- 6What are the advantages of plate heat exchangers compared to conventional heat exchangers?






