Today, I carefully positioned myself in a heat exchanger Xiaobai and tried to install a plate and gasket of the Alfa Laval M6 series together, but found that there were too many doorways inside.

First of all, do you know the pros and cons of the gasket? 
In the beginning, the three of us stared at the plate and the gasket with big eyes to small eyes. They didn’t know how to start. According to inertial thinking, we installed the side of the gasket with the convex side of the gasket facing upwards; after 20 minutes of installation 

The more and more unconfident, because it is too disobedient, after we installed the board, there is no need to do the suppression experiment, it will leak at a glance, in fact, when installing, place the gasket with the obvious angular side up and place it flat. 

On the plate, it is enough to buckle the various buckles together with the plate. In the various buckles, it can be seen whether the production and processing technology of the gasket is exquisite, because the more precise the mold of the gasket, the more accurate the gasket and the plate 
The better the tightness of the fins, the leakage of such a heat exchanger?

Secondly, the color, smell and degree of stretching of the gasket. A good gasket should not have a pungent odor. The elements removed by primary vulcanization and secondary vulcanization are different. The secondary vulcanization adopts intelligent constant temperature control to improve the overall performance of the raw material. 
more stable. 
The compression deformation rate of the gasket is reduced to less than 10%, far exceeding the domestic process standard.

It took half an hour for the first installation to install a plate and a gasket. After knowing the positive and negative of the gasket and the installation sequence, the second installation shortened the time by nearly half. The so-called practice makes perfect. Rapt produces heat exchange. 
It has been almost 20 years, and it has been exported to foreign countries for 13 years. Think about it carefully, why do you buy from China because there are leaders in heat exchangers such as Alfa Laval and GEA abroad? Quality is everything.