-
Double Wall Plates And Gaskets
The plate of the double wall plate heat exchanger replaces the single plate type with two welded plates. Once the plate is cracked or perforated, the fluid will flow between the two plates to the outside, which is easy to be found and taken. Doing this can avoid contamination or adverse reactions caused by the mixing of the two heat exchange media.More +
-
Plate And Shell Heat Exchanger Plate Pack
A bunch of circular plates made of stainless steel or other alloy material are laser welded into one body, called a heat exchanger lathed bundle, then placed in a cylinder to form a plate and shell heat exchanger. The plate and shell heat exchanger has the advantages of temperature resistance and pressure resistance with shell and tube heat exchanger, and also the advantages of high efficiency, compactness with plate heat exchanger.More +
-
Double wall plate heat exchanger principle
The double wall plate heat exchanger plate is welded integrally with two thin plate pieces along the corner hole of each pair of plates. When the plate leaks, for example, the perforation caused by long time working will be easily detected from outside. Thereby it stops mixing between two materials.And at the same time, they plays very important roles towards warning internal leakage. Combined with the double seal of the gasket, the possibility of mixing two materials is avoided, and it is suitable for applications with high sanitary requirements or high safety and reliability of industrial production. Since the two sheets are welded to form a sheet, the heat transfer coefficient is inevitably lowered, but the highest safety is achieved in preventing materials mixing.More +
-
Semi welded plate heat exchanger
The semi welded plate heat exchanger is composed of a pair of plates, and each of the two plates is laser welded to form a pair of plates. It is sandwiched between the fixed pressing plate and the movable pressing plate in a superimposed mannerMore +
-
Plate heat exchanger
A plate and frame heat exchanger as known as gasketed plate heat exchanger is a high efficiency heat exchanger that is assembled from a series of metal sheets with a certain corrugated shape. A thin rectangular channel is formed between the various sheets, and heat is exchanged through the sheets.More +
-
Wide gap plate heat exchanger
A plate and frame heat exchanger as known as gasketed plate heat exchanger is a high efficiency heat exchanger that is assembled from a series of metal sheets with a certain corrugated shape. A thin rectangular channel is formed between the various sheets, and heat is exchanged through the sheets.More +
-
Food grade plate heat exchanger
A plate and frame heat exchanger as known as gasketed plate heat exchanger is a high efficiency heat exchanger that is assembled from a series of metal sheets with a certain corrugated shape. A thin rectangular channel is formed between the various sheets, and heat is exchanged through the sheets.More +
- [Q & A]Gasket Compression Set and Bolt Torque Management in Plate Heat Exchangers2026.10.31 09:14
- Why repeat leaks are assembly problems: compression set, pack dimension versus torque, staged cross-pattern tightening and the field errors behind them.
- read（3）
- [Q & A]Parallel Plate Heat Exchanger Banks: N+1 Redundancy and Flow Balancing2026.10.29 09:16
- Why plants pipe plate heat exchangers in parallel banks: N+1 standby philosophy, header and valve arrangement, and per-unit flow at part load.
- read（3）
- [Q & A]Reading a Water Analysis Before You Specify a Plate Heat Exchanger2026.10.28 09:09
- Same duty, different water: how hardness, chloride, silica and solids in a site water analysis change plate material, velocity, gaskets and cleaning.
- read（3）
- [Q & A]Plate Heat Exchanger Sizing: A Worked Calculation from Duty to Plate Count2026.10.27 14:30
- A six-step sizing sequence worked on a 500 kW water-to-water duty: heat load, flow arrangement, U-value, LMTD, correction factor, fouling margin and plate count.
- read（4）
- [Q & A]Plate Heat Exchanger Troubleshooting: Reading the Symptoms Before Opening the Pack2026.10.27 14:30
- Three symptoms, three closed sets of causes. Diagnose temperature shortfall, rising pressure drop and leakage in the right order, cheapest check first.
- read（5）
- [Q & A]Winter Shutdown and Freeze Protection for Plate Heat Exchangers2026.10.27 09:21
- How plate packs freeze and fail, and the three defences that prevent it: draining, glycol concentration matched to climate, and heat tracing.
- read（4）
- [Q & A]Transcritical CO2 Systems: Selecting Plate Heat Exchangers for High Pressure2026.10.26 21:48
- Above the critical point the rules change: pressure rating, an internal pinch and band-by-band sizing decide a CO2 gas cooler, not LMTD.
- read（3）
- [Q & A]Waste Heat Recovery with Plate Heat Exchangers: Sizing and Fouling2026.10.26 21:48
- Where a heat source sits on the temperature scale decides everything: bands, pinch economics, fouling and the acid dew point floor.
- read（2）
- [Q & A]Plate Heat Exchangers in Heat Pump Systems: Source-Side and Load-Side Selection2026.10.26 21:47
- The heat exchanger sets a heat pump's temperature lift. Approach targets, pressure drop, glycol penalties and construction choice for source and load side.
- read（4）
- [Q & A]Plate Heat Exchangers in Data Center Liquid Cooling: CDU Selection2026.10.26 21:47
- The CDU plate pack sets facility water temperature and PUE. Approach, pressure drop, copper-free materials and double-wall options explained.
- read（4）
- [Q & A]Semi-Welded Plate Heat Exchangers for Ammonia Refrigeration2026.10.26 09:13
- Why ammonia rules out brazed copper units, how a semi-welded cassette works, and how to specify one for condensers, evaporators and oil coolers.
- read（3）
- [Q & A]Variable Flow and Part-Load Operation of Plate Heat Exchangers2026.10.25 09:15
- Part-load behaviour of a plate heat exchanger: falling pressure drop, distribution and fouling limits, minimum-flow bypass and on-site verification.
- read（4）
- [Q & A]Factory Acceptance Testing of Plate Heat Exchangers: What to Witness2026.10.24 09:07
- Running a plate heat exchanger factory acceptance test: hydrostatic test rules, pack dimension records, material certificates, hold points and remote witnessing.
- read（3）
Related search
Hot spot focusing
- 1Shandong Hengbang uses Ripute semi-welded evaporator and condenser case
- 2Haier new materials use Ripute small plate heat exchanger case
- 3Chuanqing Drilling Engineering Company uses Repute plate and shell heat exchanger case
- 4As a manufacturer of Plates and Gaskets, what are the advantages of Qingdao Ruipute Heat Exchange Equipment Manufacturing Co., Ltd ?
- 5As a manufacturer of plate heat exchangers, what are the advantages of Qingdao Ruipute Heat Exchange Equipment Manufacturing Co., Ltd?
- 6What are the advantages of plate heat exchangers compared to conventional heat exchangers?
