Plate heat exchanger gaskets are easily damaged, and once the problem occurs, it will directly affect the operation of the plate heat exchanger. Therefore, when we find that the plate heat exchanger gasket is damaged, it should be replaced in a timely manner. Of course, the replacement of plate heat exchanger gaskets should emphasize the way and method in order to give full play to its use. Next, you will be introduced to the replacement of plate heat exchanger gaskets and what are the precautions.

The correct method of replacing the plate heat exchanger gasket is as follows:

1. Remove the aging gasket and observe it carefully. According to the dirt on it, choose the cleaning method. Plate heat exchanger gaskets after cleaning will not be corroded by chemical media.
2. After cleaning the plate heat exchanger, use a high-pressure blowing device to thoroughly remove the chemical media remaining on the plate heat exchanger.
3. If rusting of the plate heat exchanger is suspected, the inner wall of the plate heat exchanger and the heat exchanger piping should be inspected and de-rusted.

4. For bonded gaskets, the dirt on the plate heat exchanger must be removed before bonding, otherwise the sealing performance of the plate heat exchanger will be affected.
5. Another point to note about plate heat exchanger gasket replacement and precautions is that after the plate heat exchanger gasket is replaced, a new test of the plate heat exchanger's sealing performance is conducted to check whether there are any abnormalities during the test and to record the relevant data of the test.

The above is the introduction of plate heat exchanger gasket replacement and precautions, I hope it will help you. As a professional brand manufacturer of plate heat exchanger gaskets, Qingdao Reapter Heat Exchanger Equipment Manufacturing Co., Ltd. is able to provide users with high quality products and services. Welcome users who need to call us for consultation.