There are not a few plate heat exchanger manufacturers in Qingdao, but few heat exchanger equipment that can operate perfectly under chlor-alkali conditions have yet to come out.

However, due to frequent exposure to such working conditions, Qingdao RPT has accumulated a lot of design and manufacturing experience in this area, and stable and efficient operation is also the best proof.

The operation of the plate heat exchanger in chlor-alkali conditions is mainly reflected in the oil cooling of the transformer, salt water preheating, chlorine treatment, liquid chlorine treatment, electrolysis process and so on.

In these processes, there is no lack of high temperature, high corrosion, large particle media, and high pressure operating conditions.

How to choose the corresponding plate material, thickness and material of the gasket is very knowledgeable.

At the same time, heat exchange efficiency must be considered. The selection of heat exchange equipment with large or small temperature differences is different.

The chlor-alkali special plate heat exchanger produced by Qingdao Ruipute  is a new type of heat exchange equipment with compact structure and high efficiency.

In chlor-alkali production, the area occupied by the new plate heat exchange is reduced by nearly 80% compared with the traditional tube heat exchanger, the direct investment is reduced by 50% to 70%, and the heat transfer efficiency is increased by 400% to 500%.

According to the working conditions, choose the appropriate material of the sheet rubber strip, and as long as the operation is in accordance with the regulations in use, the safe long-term operation of the chlor-alkali plant can be guaranteed.

In addition, the plate heat exchanger is light in weight and does not require heat preservation outside the heat exchanger.

For Qingdao plate heat exchanger to operate perfectly in chlor-alkali conditions, it must be us. Not only is it strong in R&D technology, it can also be customized for special working conditions.

You don't even have to worry about the operating conditions of your equipment, because can a heat exchanger manufactured through European and American management systems and production processes be of poor quality?