Cooling tower supporting plate heat exchangerapplication is very wide, large air compressor lubricating oil, hydraulic oil of hydraulic press, various machines with lubricating oil cooling, all need to use water to cool the oil, by the cooling tower and then give water to cool down. What are the characteristics of this heat exchange equipment? How to select the type?

Most of the normal operating temperature of oil are in about 60 ?, and cooling tower circulating water supply and return temperature of 28/32 ?, the logarithmic temperature difference between oil and water is not large, and oil-water heat transfer coefficient than water-water heat transfer to much lower, so the cooling tower supporting plate heat exchanger heat transfer efficiency to be high, and high heat transfer efficiency, can reduce the flow of cooling tower circulating water or set the equipment for intermittent operation, the maximum Save energy.

Most of the cooling tower is the choice of good effect of open cooling tower, the water is directly exposed to the atmosphere, so there will be impurities in the circulating water, cooling tower supporting plate heat exchanger flow channel to be wide, to facilitate the flow of cooling water and oil to avoid clogging, and to be easy to disassemble and clean. Most of the cooled medium is oil, whether the rubber strip is temperature resistant? Whether it can be used for a long time? So whether the choice of heat exchange equipment is appropriate, for the use of time and later operation, maintenance is vital.

Qingdao Ripert has many years of design, manufacturing and operation experience, can provide suitable, energy-saving cooling tower supporting plate heat exchanger, from the cost of equipment and operating costs for your comprehensive consideration, to provide you with high-quality, suitable products.