Heat transfer process, in the end of the differential pressure, transmission pressure loss has been determined, the main factor to determine the head of the circulating pump is the plate heat exchanger and the engine room piping, valves. Want to reduce pressure loss, save energy, choose a good plate heat exchanger equipment is vital, from the following two aspects to analyze the plate heat exchanger supporting pump head how to choose to be more reasonable.

First, from other factors outside the heat exchanger equipment to reduce pressure loss, pay too much, such as increasing the diameter of the pipe; and from the heat exchanger equipment to reduce pressure loss, as long as the selection of a reasonable type of equipment, a one-time investment increase is not large, but the effect of reducing pressure loss is obvious.

Second, the choice of what plate heat exchanger equipment to effectively reduce the pressure loss, reduce the plate heat exchanger supporting pump head, reduce energy consumption. According to the actual operating conditions, the use of professional selection software, combined with our operating experience, to select the most appropriate plate type. For different working conditions: plate corrugation herringbone corrugation, flat corrugation, horizontal and vertical corrugation, etc.; corrugation depth is 1.5mm ~ 12mm different; corrugation angle is divided into large angle (high flow resistance plate), small angle (low flow resistance plate); plate length and width ratio of 1.5 ~ 8 ranging. Only by choosing the reasonable plate type and matching various types of plates, can we design the heat exchange equipment with high efficiency and energy saving.

Qingdao Reapter plate type is complete, there is a long time of design, selection and operation experience, plate heat exchanger supporting pump head how to reduce the important consideration for our customers to save operating costs, from the equipment investment and energy savings in many ways, to provide customers with high quality and low cost, reasonable operation of heat transfer equipment, welcome to call us.