Reapter

contact us
Location: Home >Latest news

Some people have regretted the choice of Plate heat exchanger raw material you do it right?

Return list Reffer:Reapter
Some people have regretted the choice of Plate heat exchanger raw material  you do it right?
Click number:- Release time:2021-09-28



Plate heat exchanger raw material selection is in the process of use, a topic that can not be bypassed, and even a lot of people do not understand the principle of the case with the random, resulting in the results can be imagined, either corrosion perforation or internal leakage, resulting in losses are also difficult to predict, all the right material is fundamental, you must be clear about this matter.

Since we are talking about materials, then the main raw materials of heat exchangers include what? For the plate, there are stainless steel, Hastelloy, titanium, duplex steel, nickel, 254SMO and so on, the light of these pairs with the use of different media, if you choose to have problems, corrosion perforation and other problems will follow, and the consequences will be self-evident.

Plate heat exchanger raw material


Plate heat exchanger raw materials also include the frame plate and gasket material. First of all, the gasket, not only the plate material, gaskets also include nitrile rubber, EPDM rubber, fluorine rubber, hydrogenated nitrile rubber, different media corresponding to the material is different, which includes water, steam, oil, and more corrosive media, such as sulfuric acid, etc., with which, how to correspond to the design process should be noted in the selection. Speaking of the framework, the common framework of carbon steel, stainless steel, and a variety of low-temperature steel, the same, these raw materials correspond to the working conditions are not the same.

Qingdao Reapter for plate heat exchanger raw material selection is never strict requirements, one is to meet both the use of working conditions, the second is that these raw materials must be qualified, or even the same international brand manufacturers of procurement standards, three is to buy back to test. The good or bad of the material directly determines the efficacy and service life of the equipment, for this requirement we are deeply concerned. If you want some high quality products, you may want to try our family, at least, we have made you back in the selection of raw materials, because good and use.

【Paper label】:Plate heat exchanger raw material

Relevant article

Latest information