Plate sterilizer supporting plate heat exchanger for removable plate heat exchanger, respectively, are divided into herringbone corrugated and horizontal-shaped corrugated, sealing rubber strips are hooked free of adhesive structure, and standards to comply with FDA and GMP, easy maintenance, high health standards, in the dairy industry instantaneous sterilization of fresh milk and cooling of dairy products are widely used, can also be used for juice, vinegar, tea drinks, soy sauce, wine and other industries of heating and cooling, is the most ideal sterilization heat exchange equipment for food conditions in. Multi-stage can be combined in a variety of ways, applied to the mainframe of the sterilization technology equipment, can be used mainly for two cooling or waste heat recovery, heating and cooling conditions.

Plate sterilizer supporting plate heat exchanger and ordinary plate heat exchanger difference is: the same point: the appearance of all the forms of plate, the equipment in the gasket and plate are the same as the plate type. Differences: relatively speaking, the differences are still more. 1, the requirements of the sealing gasket. Because of the food industry, so the production standard of the gasket must be food-grade, requiring a higher standard of hygiene. 2, the frame and bolts. Also because of the food industry, are made of stainless steel. 3, segmentation. Because the equipment process is different from the traditional sterilization process, often divided into multiple stages. The most commonly used is the 3-stage type: sterilization section for the first stage, heat recovery section for the second stage, cooling section for the third stage; there is also the use of 5-stage type, is used to carry out ultra-high temperature sterilization process.
   Qingdao Reapter plate heat exchanger manufacturers specializing in the production of plate sterilizer supporting plate heat exchanger, can be customized according to the use of different working conditions, welcome users to consult and investigate!