One of the common problems with heating plate heat exchangers is that the medium does not reach the preset temperature at the exit. Engineers at Qingdao Ruipute often get calls about this and ask us to help analyze the cause and provide solutions.In fact, this problem is very simple, and the solution we provide to our customers is also very effective. Let's talk about it today.

The temperature at the exit does not reach the preset value. The main reasons are firstly, low temperature at the cold side and low temperature at the cold and hot ends.Second, the flow distribution of multiple plate heat exchangers running in parallel is uneven.Thirdly, the inner scale of the heat exchanger is serious.Fourth, insufficient flow of the primary side leads to large temperature difference and small pressure drop on the thermal side.There is the problem of temperature, there is the problem of scaling, there is the problem of flow.Which link went wrong after all, this needs to be analyzed on a case-by-case basis.

For these problems, our engineers have also given solutions. The principle is to do the right thing. For example, if the problem is flow, increase the flow of the heat source or increase the diameter of the heat source medium pipe.If it is due to the parallel connection problem, then balance the flow of multiple plate heat exchangers running in parallel.If internal scaling is serious, the plate heat exchanger must be disassembled to clean the surface of the plate.Anyway, whatever happens to your plate heat exchanger can be fixed.

Qingdao Ruipute adopts European and American production and management standards in the processing and manufacturing of heating and industrial plate-type heat exchangers, making the products similar to international big brands in terms of quality and operation performance.If your equipment has a heat exchange efficiency problem, or you want to replace a new equipment, come to Qingdao Ruipute to see us, it will be right.